OPERATION AND DISPLAY
The BHFL chargers start automatically as soon as the mains socket is plugged in and mains voltage 230V /50 Hz is applied
to the charger.
The following main menu appears and the following programs are available
1
Easy charging (battery is charged with medium power, without entering further parameters)
2
Boost charging (battery is charged with maximum device power)
3
Charge + Test (battery is tested and charged)
4
Service mode (buffer operation during service/diagnosis on the car, as
well as backup operation during battery change)
5
Reactivation (refreshing of sulfated or deeply discharged 12V lead-
acid batteries (Not applicable for GEL-AGM and Lithium!).
6
Setup for setting device parameters
SETTINGS
After calling, the following settings can be adjusted:
- LANGUAGE
By tapping the field, the language can be switched (DE, GB, FR, IT, ES,...).
- COMPANY / WORKSHOP
The address data (name, address) required for the test protocol of the battery test
are stored here.
- CHARGER
The charging voltages of the individual charging programs EASY, BOOST SER-
VICE, CHARGE + TEST are stored here.
Please note that the charging voltages for 12V and 24V operation must be set
separately!
The length of the charging cables must also be set so that a correct evaluation can
be made during the battery test.
6
(EN)
