Motorola IMPRES 2 Guia Del Usuario página 4

English
IMPORTANT SAFETY INSTRUCTIONS
This document contains important safety and operating instructions.
Please read these instructions carefully and save them for future
reference.
Before using the battery charger, read all the instructions and
cautionary markings on (1) the charger, (2) the battery, and (3) the
radio using the battery.
WARNING
extension cord must be used, make sure that the cord size is
18 AWG for lengths of up to 6.5 feet (2.0 m), and 16 AWG for
lengths up to 9.8 feet (3.0 m).
3. To reduce risk of fire, electric shock, or injury, do not operate the
charger if it has been broken or damaged in any way. Take it to a
qualified Motorola Solutions service representative.
4. Do not disassemble the charger. Disassembling the charger may
result in risk of electric shock or fire. The only repairable/
replacement parts are the NNTN9212 and NNTN9213 Pocket
Inserts. Follow the instructions in APX-Series IMPRES 2 Multi-Unit
Charger Pocket Insert Kits MN005697A01.
5. To reduce risk of electric shock, unplug the charger power supply
from the AC outlet before attempting any maintenance or
cleaning.
6. To reduce risk of injury, charge only the rechargeable Motorola
Solutions authorized batteries listed in Table 2. Other batteries
may explode, causing personal injury and damage.
7. Use of accessories not recommended by Motorola Solutions may
result in risk of fire, electric shock, or injury.
Save These Instructions
1. To reduce risk of damage to the power cord, pull the
plug rather than the cord when disconnecting from the
AC outlet or the charger.
2. An extension cord should not be used unless
absolutely necessary. Use of an improper extension
cord could result in risk of fire and electric shock. If an
1