Motorola IMPRES 2 Guia Del Usuario página 42

IMPRES 2 Batteries with Sleep Mode
Some IMPRES 2 batteries are equipped with a Sleep mode. Sleep
mode is used to extend the time until the next battery charge. Upon
completion of Ship Lithium or Long-Term Storage charging, the charger
puts these batteries to sleep.
Placing a sleeping IMPRES 2 battery into any charger will wake it up. If
the battery is prepared for Lithium Shipment, placing it into a charger
set to Ship Lithium will put the battery back to sleep. If the battery is
prepared for Long-Term Storage, placing it into a charger set for Long-
Term Storage will put the battery back to sleep.
Calibration Menu
The Calibration setup selections enables or disables the Discharge
phase of Calibration/Reconditioning. The Discharge phase precedes
the full charge required for successful Calibration/Reconditioning. This
feature is useful when the charger is deployed to a location requiring
the battery to be for use as quickly as possible. In these situations,
waiting for the battery to discharge may be inconvenient.
If an IMPRES 2 or IMPRES battery is due for calibration and is already
discharged when inserted into the charger, the charger takes the
opportunity to use charge completion as battery calibration.
Figure 7: Calibration Menu
39