Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Warranty and Legal
Important Safety Instructions
This document contains important safety and operating instructions.
Before using the battery charger, read all the instructions and cautionary markings on the charger and
the battery.
WARNING: Read these instructions carefully and save them for future reference.
•
To reduce the risk of damage to the power cord, pull the plug rather than the cord when
disconnecting power cord from the AC outlet or the charger.
•
To reduce the risk of fire or electric shock, avoid using an extension cord. If an extension
cord must be used, ensure that the cord size is 18 AWG for lengths of up to 6.5 feet (2 m),
and 16 AWG for lengths up to 9.8 feet (3 m).
•
To reduce the risk of fire, electric shock, or injury, do not operate the charger if it is broken or
damaged in any way. Take it to a qualified Motorola Solutions service representative.
•
To reduce the risk of fire or electric shock, do not disassemble the charger. It is not
repairable and replacement parts are not available.
•
To reduce the risk of electric shock, unplug the charger power adapter from the AC outlet
before attempting any maintenance or cleaning.
•
To reduce the risk of injury, charge only the rechargeable authorized batteries. Other
batteries may explode, causing personal injury and damage.
•
To reduce the risk of fire, electric shock, or injury, only use the accessories recommended
by Motorola Solutions.
•
Changes or modifications made to this device, not expressly approved by Motorola
Solutions, could void the authority of the user to operate this equipment.
Operational Safety Guidelines
•
This equipment is not suitable for outdoor use. Use only in dry locations and condition.
•
Maximum ambient temperature around the charger must not exceed 40 °C (104 °F).
•
Connect the charger only to an appropriate power cord listed in Motorola Solutions Authorized
Power Cord List.
•
The AC outlet to which the power cord is connected should be close and easily accessible.
•
Make sure the power cord is located where it will not be stepped on, tripped over, or subjected to
water, damage, or stress.
•
Connect the power cord only to an appropriately fused and wired AC outlet with the correct voltage,
as specified on the product.
•
Disconnect from line voltage by removing the power cord from the AC outlet.
•
Multi-Unit Charger will charge the batteries listed in Motorola Solutions Authorized Batteries table.
•
The outlet to which this equipment is connected should be nearby and easily accessible.
Disclaimer
The information in this document is carefully examined, and is believed to be entirely reliable.
However, no responsibility is assumed for inaccuracies.
MN007338A01-AC
Warranty and Legal
7
Capítulos
Tabla de contenido
