Motorola IMPRES 2 Guia Del Usuario página 19

Charging USB Accessories
Some IMPRES 2 Multi-Unit Charger Communications Modules provide
USB Type-A sockets to charge USB accessories. USB accessories
charge best at room temperature.
1. Place the IMPRES 2 Adaptive Charger on a flat surface.
2. Firmly insert the power cord into the charger AC Socket on the back
of the charger.
3. Plug the power cord into a matching power outlet.
4. Upon successful power-up, each pocket Status LED flashes Green
for 1 second and IMPRES 2 CHARGER is displayed. If the Status
LEDs do not flash and no message is displayed, check power cord
connections.
5. A USB accessory can have one Micro-AB receptacle for charging.
Use a standard 1-meter or shorter USB cable with a Type A plug on
one end and an accessory-compatible plug on the other end
(typically Micro-B or Micro-AB).
6. Orient the USB cable Type A plug to align properly with a Type A
port on the Communications Module. Insert the plug into the port.
7. Orient the USB cable Micro-B plug to align properly with the Micro-AB
receptacle on the USB accessory. Insert the plug into the receptacle.
8. When the USB connections are properly seated, the charging
status is indicated by the USB accessory. Refer to the USB
accessory User Guide for details.
16