Motorola IMPRES 2 Guia Del Usuario página 30

Table 13: Long-Term Storage Indications of an IMPRES 2 or IMPRES
Battery - Battery is due for Calibration (Cont.)
Status
Fault
• Battery is not making
proper electrical contact
with the charger.
• Battery is not an
IMPRES 2 or IMPRES
battery.
• An unknown condition is
preventing the battery
from being discharged.
• Charging is completed
before the Long-Term
Storage goal is reached.
• The charger pocket is a
special type.
Standby
• Battery is waiting to rapid
charge.
• Battery is too hot, too
cold, or low voltage.
• Charger is too hot.
Note:
• The following messages are introduced in software version V1.05:
- Cannot Discharge, for LT Storage
- Store Incomplete, Low Capacity:yy%
- Hot Charger, Waiting to Chrge
• The following messages are introduced in software version V1.11.01:
- Wrong Batt Type, Cannot LT Store
- Radio Pocket, Cannot LT Store
- Charging Pocket, Cannot LT Store
Charger Display
WARNING:
NOT CHARGEABLE
REMOVE& REINSERT
OR
WRONG BATT TYPE
CANNOT LT STORE
OR
CANNOT DISCHARGE
Flashing Red
FOR LT STORAGE
OR
STORE INCOMPLETE
Low Capacity:yy%
OR
RADIO POCKET
CANNOT LT STORE
OR
CHARGING POCKET
CANNOT LT STORE
WARNING:
HOT BATTERY
WAITING TO CHRGE
OR
COLD BATTERY
Flashing Amber
WAITING TO CHRGE
OR
VERY LOW BATTERY
WAITING TO CHRGE
OR
HOT CHARGER
WAITING TO CHRGE
27
LED Indicator