Work Principal; Installation & Transportation; Transportation - Corghi ProLine 60 Manual De Uso

Special instruction:
For the outreach of the main shaft is limited, so
there is some limit to the distance from flange disk
to the outside edge of the tire should less than
170mm as shown in the figure. On this condition,
you can operate correctly.

3.3 WORK PRINCIPAL

Balancing sensor tests the unbalance signal and
send it to the terminal of the microprocessor via A/D
converter. Processor will calculate the unbalance
value through synthesized analysis to the unbalance
signal and angle signal of the main shaft.
ProLine 60 - Operator's Manual
4. INSTALLATION
& TRANSPORTATION

4.1 TRANSPORTATION

- Place, carry and store the machine according to
the indication of the label on the package carton.
- Store environment: RH20%-95% temperature
-10°-+60°
- When transport and use the machine, do not
pull the rotation shaft, or it will cause the per-
manent damage.
WARNING
Do not lift the machine at any other position.
4.1.1 After being sure that the package of your
machine is perfect, you can carry the wheel ba-
lancer to the installation site. (Fig3).
Packaging dimensions:
Length .......................................................710 mm
Depth ........................................................980 mm
Height ......................................................1160 mm
Weight ..........................................................137 kg
Packaging weight ..........................................30 kg
The choice of the installation should comply
with the following requirements. The ambient
temperature is 0°-50° and the RH ≤85%. And the
installation site as shown in Fig4.
UK
3
39