Corghi ProLine 60 Manual De Uso página 35

INSTALLATION
WARNING
Take the utmost care when unpacking, assem-
bling, lifting and setting up the machine as
indi¬cated below.
Failure to observe these instructions can damage
the machine and compromise the operator's
safety.
Remove the original packing materials after
positioning them as indicated on the packaging.
WARNING
All regulations in force concerning safety at
work must be complied with when choosing the
installation position.
In particular, the machine must only be installed
and operated in protected environments where
there is no risk of exposure to dripping.
IMPORTANT: for the correct and safe operation
of the machine, the lighting level in the place of
use should be at least 300 lux.
Environmental operating conditions must comply
with the following requirements:
- relative humidity ranging from 30% to 80% (wi-
thout condensation);
- temperatures ranging from 0° to +50°C.
WARNING
The floor must be strong enough to support a
load equal to the weight of the equipment plus
the maximum load allowed.
WARNING
The machine must not be operated in potentially
explosive atmospheres.
ProLine 60 - Operator's Manual
SAFETY REGULATIONS
WARNING
Failure to comply with the instructions and
danger warnings can cause serious injuries to
the operator or other persons.
Do not operate the machine until you have read
and understood all the danger/warning notices
in this manual.
The correct use of this machine requires a
qualified and authorized operator. This operator
must be able to understand the manufacturer's
written instructions, be suitably trained and be
familiar with the safety procedures and regula-
tions. Operators are forbidden to use the machine
under the influence of alcohol or drugs that could
affect his/her physical and mental capacity.
The following conditions are essential:
- read and understand the information and in-
structions described in this manual;
- have a thorough knowledge of the features and
characteristics of the machine;
- keep unauthorized persons well clear of the
working area;
- make sure that the machine has been installed
in compliance with all relevant standards and
regulations in force;
- make sure that all machine operators are sui-
tably trained, that they are capable of using the
ma¬chine correctly and safely and that they are
adequately supervised during work;
- do not touch power lines or the inside of electric
motors or any other electrical equipment before
making sure that they have been powered off;
- read this booklet carefully and learn how to use
the machine correctly and safely;
- always keep this user manual in a place where
it can be readily consulted and do not fail to
refer to it.
WARNING
Do not remove or deface the DANGER, CAUTION,
WARNING or INSTRUCTION decals. Replace any
missing or illegible decals. If any decals have
become detached or damaged, it is possible to
obtain them from your nearest reseller.
-Observe the unified industrial accident pre-
vention regulations relating to high voltages and
rotating machinery whenever the machine is in
use or being serviced.
- Any unauthorized changes or modifications
UK
35