Auxiliary Usb Jack - Benelli TRK 502 Manual Del Propietário

Instrument and control functions

Auxiliary USB jack

WARNING
To prevent electrical shock or short-circu-
EN
iting, make sure that the cap is installed
when the auxiliary (USB) jack is not being
used.
3
NOTICE
The accessory connected to the auxiliary
USB jack should not be used with the en-
gine turned off, and the load must never
exceed 24 W (2A), otherwise the fuse may
blow or the battery may discharge.
This vehicle is equipped with an auxiliary USB
jack.
A 12-V accessory connected to the auxiliary
USB jack can be used when the key is in the
" " position and should only be used when
the engine is running.
To use the auxiliary USB jack
1. Turn the key to " ".
2. Remove the auxiliary USB jack cap.
1
1. Auxiliary USB jack cap
3. Switch off the accessory.
4. Insert the accessory plug into the auxiliary
socket (USB).
1. Auxiliary USB jack
5. Turn the key to " ", and then start the en-
gine. (See page 5-1).
6. Switch on the accessory.
3 - 18
1