Sidestand - Benelli TRK 502 Manual Del Propietário

STANDARD SETTING TRK502
Front
Without setting
suspension
Rear shock
-5 click from
absorber rebound
all close position
Rear shock
Without setting
absorber compression
STANDARD SETTING TRK502X
Front
Without setting
suspension
Rear shock
-10 click from
absorber rebound
all close position
-7 click from
Rear shock
all close position
absorber compression

Sidestand

The sidestand is located on the left side of
the frame. Raise the sidestand or lower it with
your foot while holding the vehicle upright.
TIP
The built-in sidestand switch is part of the
ignition circuit cut-off system, which cuts the
ignition in certain situations.
(See the following section for an explanation
of the ignition circuit cut-off system.)
3 - 15
Instrument and control functions
WARNING
The vehicle must not be ridden with the
sidestand down, or if the sidestand cannot
be properly moved up (or does not stay
up), otherwise the sidestand could contact
the ground and distract the operator, re-
sulting in a possible loss of control.
Benelli's ignition circuit cut-off system has
been designed to assist the operator in
fulfilling the responsibilityof raising the
sidestand before starting off. Therefore,
check this system regularly and have a Be-
nelli dealer repair it if it does not function
properly.
EN
3