C3.3 Positioning The Probe - Nanosonics trophon 2 Manual Del Usuario

C3.3 Positioning the Probe

1. If AcuTrace is enabled, when prompted, scan the trophon AcuTrace Medical Instrument Tag.
2. Open the chamber door and load the probe and a Chemical Indicator.
3. Two clamps (see Figure 10) hold the probe cable securely in the chamber.
4. Wearing gloves, insert the probe into the trophon2 device by gently pulling the probe cable against
the cable clamp (see Figure 10a). Then carefully pull the cable upwards until the probe is
suspended in the correct location and the probe cable is held by the cable seal (see Figure 10b).
Refer to Figures 11–12 and note a correctly positioned probe in the trophon2 device.
Do not pull the probe down when loaded in the cable clamp.
Figure 10
Figure 11
23
L03082 1.0 09/2021
a
b
Figure 12