Start And End Of Seam - Texi Joy 48 Manual De Operación

EN
CAUTION:
1.
After adjusting the stitch width, turn the hand wheel 2-3 circles towards you to check if the
needle will touch the presser foot or not. If the needle can touch the presser foot, the needle
will be bent or broken.
2.
If the stitches are sewed together, please increase the stitch length before continuing to sew,
otherwise will cause needle bent
3.
By stitch lenght dial it is also possible to change program for sewing buttonhole. When you
dial this on the LCD will be shown adequately b1, b2, b3.

START AND END OF SEAM

CAUTION: While sewing, spacial care is required around the needle area. As
the machine automatically feeds the fabric, do not
pull nor push fabric.
1.
Move needle to its highest position by using
position needle button
2.
Place the fabric under the presser foot.
3.
Lower the presser foot.
4.
Hold back threads when starting machine. Let
threads go after sewing a few stitches.
5.
Regulate the speed while sewing.
6.
Stop machine when you reach end of seam.
7.
Raise the presser foot lifter.
8.
When you have reached the end of a seam, stop sewing and turn
the handwheel toward you to bring the needle to it's highest
position. Raise the presser foot and pull the fabric out from
under the foot to the back of the machine. Cut the threads on
the thread cutter.
74
top thread
bobbin thread
Texi Joy 48
needle
position
button