Tabla de contenido
Idiomas disponibles
Idiomas disponibles
4.�
�lectrical connection
1. Check the correspondence of the mains tension and
the tension shown on the identification tag.
2. Ask a qualified electrician to mount a connection
plug for single-phase or (depending on the tension
you have ordered ) three-phase current (see the
electrical connections diagram inside the electrical
panel).
i
The costs of arranging a mains protection device for
the plug are borne by the customer.
3. Protect the TCE 5310 according to specific national
rules.
4.4
�heck rotation direction
Warning - malfunctioning danger!
TCE 5310 turns in counter-clockwise direc-
tion.
¶
Turn off the main switch.Check the manual
section dedicated to functioning anomalies
to find the cause (see chap. 5.3)
For a correct functioning of TCE 5310 it is extremely
important that after having connected and started the
machine the rotation direction corresponds to that
shown by the arrow on the control unit motor.
Fig. 2:
Check rotation direction.
Robert Bosch GmbH
All manuals and user guides at all-guides.com
5.
!
Operating instructions | T�� ���� | 2�
Operating instructions
Warning - tire or rim damage danger!
Excessive pressure can e. g. result in cracks
(on the inside/outside) of the tire. The rim
can be scratched or deformed.
¶
Read the Wdk publications available in
German and English! (www.wdk.de: moun-
ting/demounting instructions – criteria
catalogue)
¶
Inner temperature of the tire must be at
least 15 °C (only in case of RFT/UHP).
¶
Read the Wdk publications available
in German and English! (www.wdk.de:
mounting/demounting instructions – tire
overheating)
¶
Adjust pressure to the type of tire.
¶
Use the plastic protections on the types of
rim that need it.
Before demounting or mounting operations it is ext-
remely important to collect all the rim and tire data.
In this way it will be possible to know in advance the
mounting, the pressure and the required accesso-
ries!
T�� ���� | 2�
| 2�
en
|
1 695 301 840
2011-07-14
Capítulos
Tabla de contenido
