Pressure Sensor - Malaguti SPIDER MAX GT 500 Manual Diagnóstico

SPIDER MAX 500

17. PRESSURE SENSOR

There is not a system connected to this sensor as it is directly assembled inside the central unit.
The sensor allows the central unit optimising the engine performances according to altitude change.
In order to check the sensor operation, proceed as follows:
Connect the diagnostic multimeter.
Select the menu from the "ERRORS" function. Check the pressure sensor for anomalies.
Select the menu from the "PARAMETERS" function.
Check that the pressure indication expressed in mm/Hg matches the value indicated by another motorcycle
or outdoor barometer. Max. allowed error: ±20 mmHg.
The room pressure signal is correct.
All manuals and user guides at all-guides.com
Parameters
Immobilizer
Errors
Delete errors
Active diagnostics
CO calibration
Main
Replace the injection central unit.
102 12/04
Throttle
Pressure
Water temperature
Air temperature
Battery voltage
Injector
3/8 Errors
Lost synchronisations 1D
Lost synchronisations > 1D
TPS reset
CO already calibrated
R/O step difference
Atmospheric pressure mmHg 783.0
Parameters
Replace the injection central unit.
B
1/3 AM
0
0
NO
NO
55
3/3