Malaguti SPIDER MAX GT 500 Manual Diagnóstico página 141

SPIDER MAX 500
4.2 Backlight adjustment (BACKLIGHT)
To adjust the backlight the low beams (and then the equipment backlight)
must be lit. In this condition, press the mode button beside the word
BACKLIGHT (in the Set-Up window) for at least 2 seconds to adjust the
backlight (coded by a graphic bar, as shown in F. 13) and press for a short
time the mode button until the required value is reached. To go back to the
Set-up menu simply press the mode button for at least 2 seconds.
Note 1: If the low beams are switched off after accessing the adjustment menu, the system escs the adjustment
function and save the last value set by the user.
Note 2: if the button is not pressed within 20 seconds from accessing the adjustment menu, the system
automatically goes back to the standard operation mode.
Note 3: if the motorcycle is started (speed>0) after accessing the adjustment menu, the system automatically
goes back to the standard operation mode.
4.3 Display contrast and mode adjustment (DISPLAY)
In order to adjust the display contrast and mode (Normal or Reverse image)
simply press the mode button beside the word DISPLAY (in the Set-up
window) for at least 2 seconds.
Two modes are possible for the display contrast adjustment (F. 14):
1) Automatic (default): the contrast optimal value, displayed by means of
the graphic bar, is set automatically.
2) Manual: the user can adjust the required contrast value, displayed by means the graphic bar, manually. Actually it is
a semi-automatic adjustment as, according to the display temperature function, the system allows the user adjusting
the value only within a given range that ensures the display visibility.
The automatic mode is set as default value. To select the manual mode simply press the mode button beside the
word "Manual" for at least 2 seconds until a triangle, which indicates that the selection has been made, is displayed
beside the same word. A short pressure of the mode button allows adjusting the required value.
Two different display mode adjustment procedures are possible:
1) Normal (default): only the necessary parts of the display are switched on while all the others (in the background) are
switched off.
2) Reverse: it is the negative image of the previous mode where all the parts in the background are switched on while the
parts selected to be displayed are switched off.
The Normal mode is set as default value. To select the negative image mode by simply pressing the mode button
beside the word "Reverse" for at least 2 seconds until a triangle which indicates that the selection has been made is
displayed beside the same word.
After the adjustment operations are over, press the button beside the EXIT function for at least 2 seconds to go back
to the standard operation mode.
Note 1: if the button is not pressed within 20 seconds from accessing the adjustment menu, the system
automatically goes back to the standard operation mode.
Note 2: if the motorcycle engine is started (speed>0) after accessing the adjustment menu, the system automatically
goes back to the standard operation mode.
All manuals and user guides at all-guides.com
15
F. 13 Backlight adjustment
F. 14 Display adjustment
12/04
A