Malaguti SPIDER MAX GT 500 Manual Diagnóstico página 182

SPIDER MAX 500
11. AUTODIAGNOSTIC SYSTEM
The injection central unit is equipped with an autodiagnostic function.
In case an anomaly is detected, the central unit:
- switches the injection led on (only when present).
- performs a check of the engine management on the basis of the data contained in the central unit (when possible).
- stores the anomaly (always).
In case the anomaly is not continuous, the led follows the anomaly recurrence and the storage function remains on. The
anomaly is automatically deleted from the memory when it does not recur for more than 16 cycles of use of the
motorcycle (heating- use- cooling down). The data stored are not deleted when the battery is disconnected.
11.1 Stored anomaly check
Connect the diagnostic multimeter to the motorcycle sy-
stem.
Select the menu from the "ERRORS" function (see para-
graph 6.1 - p. 37).
The multimeter pages contain the list of errors that can be
detected by the autodiagnostic system. The errors detected
by the autodiagnostic system are indicated by one or two
reference dots.
The dots are positioned on two lines:
Line A = current (present) anomalies
Line M = stored anomalies
All manuals and user guides at all-guides.com
F. 16
F. 16/a
56 12/04
B
Parameters
Immobilizer
Errors
Delete errors
Active diagnostics
CO calibration
Main 3/8
Coil • •
Stepper motor
Pump relay
Fan
Auto-adaptation parameters
RAM memory
Errors 2/3 A M