Malaguti SPIDER MAX GT 500 Manual Diagnóstico página 211

SPIDER MAX 500
In order to check the sensor and the sensor circuit proceed as follows:
Connect the diagnostic multimeter. Start the engine.
The engine started regularly.
Select the menu from the "ERRORS" function.
Check the "signal panel" for anomalies.
Select the menu from the "PARAMETERS" function.
Check the number of:
Lost synchronisations = 1 tooth
Lost synchronisations = > 1 tooth
Lost synchronisations
Lost synchronisations > 1D
TPS reset
CO already calibrated
R/O step diff.
Atmospheric pressure mmHg 774.4
Parameters
Indication = 1÷3
The Rpm/speed signal is
normal.
All manuals and user guides at all-guides.com
H.T. coil
Stepper motor
Pump relay
Fan relay
Signal panel • •
RAM memory
Errors 2/3 A M
1D
NO
NO
3/3
The value
progressively
increases, insisting on
the engine start-up.
Check the circuit and
the sensor.
85
The engine does not start.
Select the menu from the "ERRORS"
function.
No anomaly
detected.
0
0
53
03/05
B
Carry out the
intervention
required by the
detected
anomaly.