Different Configurations - Robot Coupe J80 Ultra Manual De Instrucciones

DIFFERENT
CONFIGURATIONS
The J 100 Ultra juicer comes supplied with all the
accessories you will need and is designed to adapt
itself to your particular needs and work setting.
For example, it can be configured to suit the cha-
racteristics of your work station:
• Install the booster base 10 if you are going to use
tall containers to collect the juice (see page 27).
• In normal usage, you can process more than ten
kilos (according to the nature of the produce)
before you need to empty the pulp container 6
(see page 27).
• For high-volume juicing, the ejection chute 7 (see
page 27) does away with the need to empty the
pulp container. If you opt for this configuration,
make sure you place a large bin (not supplied) di-
rectly below the chute.
There are two solutions for this configuration:
1) Make a 10 cm Ø hole in the worktop through
which the ejection chute 7 can protrude (see
photos opposite). This is the best solution in
terms of efficient worktop organization.
2) Worktop edge.
When positioning the machine on the edge of
the worktop, use the markers on either side of
the booster base 10 (see page 27) as your
guide.
Warning:
to avoid the risk of the machine falling
off the worktop, make sure that it is correctly
positioned.
• Summary of all the different possible configurations, according to the nature of the work
station and the height of the juice containers (for information only):
Booster base 10
Container
use (see page 27)
Not necessary
Containers
Max. height 16 cm
Necessary if
container more
than 16 cm high
Containers
Max. height 25 cm
Intensity
Example of use
of use
• With pulp container 6
(see page 27)
Normal
• No worktop cutout required.
• With ejection chute 7 and
strap 9 (see page 27)
• Worktop edge
No cutout required
Intensive
• With ejection chute 7
(see page 27)
• Ejection below worktop.
10 cm Ø hole required in
worktop.
• With pulp container 6
(see page 27)
Normal
• No worktop cutout required.
• With ejection chute 7
(see page 27)
• Worktop edge
No cutout required
Intensive
• With ejection chute 7
(see page 27)
• Ejection below worktop.
10 cm Ø hole required in
worktop.
29