Replacing The Pedal Micro Switch - NAMCO TIME CRISIS 4 DX Manual Del Operador

7-21 Replacing the Pedal Micro Switch

1. Remove the Pedal Assy from the Coin Tower Assy.
2. Remove 4off security screw (M5x12) and remove the Cover M.
Torx screws (M5 x 12)
3. Remove 2off pozi head screw (M3x16) and remove the switch.
When replacing the switch, ensure that the wires are fitted to the correct terminals.
4. Slacken the 2off whizztite nuts (M4) and adjust the microswitch bracket so that the
switch plunger operates the switch correctly without bending the switch lever against
the switch body.
Foot plate
5. Reassemble in reverse order.
•
After replacing the Micro Switch, go to Test Mode to check operation.
(see 6-2-3-3 page 61)
96
Cover (M)
Pozi head screw (M3x16)
Microswitch
pedal
released
Whizz nut
Pedal
pressed
( See 7-2-1 page 71).
Torx screws (M5 x 12)
Microswitch
Plunger