Operation Check (After Power On) - NAMCO TIME CRISIS 4 DX Manual Del Operador

5-1-2

Operation Check (after power On)

Turn the power to the machine ON and check the following items.
1. Does touching the machine give electric shocks.
2. Is there a smell of burning, abnormal noise or vibration.
3. Is there any other sign of abnormality or malfunction.
l
Note:
If any of the above occur immediately turn the power to the machine OFF and
disconnect from the power supply until the problem has been rectified.
4. Check that sound is produced from each speaker.
5. Check that the fluorescent lamp in the Header Assy is illuminated.
6. Check that the SIDELED PC board are illuminating. (two LEDs for the Gun Tower
(L) and (R) and two LEDs for the Speakerbox Assys)
7. Check that the image displayed on the Monitors is correct.
To check the following items press the Service button and play the game.
8. Check that both Guns are operating correctly.
9. Check that both Pedal Assys are operating correctly
10. Check that two players can play in linked mode.
Do not install the machine where spot lamps, direct sunlight or other bright or
flashing lights can reflect on the monitor screens as such lights may prevent the
gun sensors detecting properly.
47