Gun Maintenance; Separating The Gun; Replacing The Bush Switch - NAMCO GUN SURVIVOR 2 Manual Del Operador

7-3 Gun Maintenance

7-3-1

Separating the Gun

1. Remove 4off security screw (M4x16), 3off security screw (M4x20) and
remove the Gun Case (R).
2. Reassemble in reverse order.
7-3-2

Replacing the Bush Switch

1. Separate the Gun (see 7-3-1 above)
2. Disconnect the connector.
3. Remove the retaining nut and withdraw the Bush Switch.
4. Reassemble in reverse order.
Security screw (M4x16)
Bush Switch
Page 61
Security screw (M4x16)
Gun Case (R)
Security screw (M4x20)
Retaining Nut
Connector