I/O Test - NAMCO TIME CRISIS 4 DX Manual Del Operador

6-2-3 I/O Test

This screen is used to set the game options.
1. Select 'GAME OPTIONS' on the Menu screen, and press the Enter button. The
following screen will be displayed.
DIP
LINK
LINK AS
I/O PCB CHECK
GUN INITIALIZE
SWITCH TEST
SOLENOID TEST
LED TEST
EXIT
SELECT SW: CHOOSE
2. Use the Select switch to choose an item to be changed. The selected item is
indicated in red.
3. Press the Enter Button to continue. The selected test screen will be displayed.
4. When all tests have been made, select EXIT and press the Enter button to return to
the Menu screen.
(a) DIP Switch Settings
Displays the setting of the DIP switches. Switches set to ON will be shown in red.
All DIP switches should be set to OFF
(b) Link Check
Indicates the communication status between Player 1 and Player 2
LINK AS: 1 (LEFT) - The screen on the left
2 (RIGHT) - The screen is on the right.
§ If 'LINK OFF' or 'LINK NG' is indicated, the game will not operate correctly.
(c) Indicates condition of the I/O PC board.
(d) Used to Initialize the gun sighting.
(e) Used to test game switches.
(f) Used to test the gun recoil solenoid.
(g) Used to test the Display LEDs.
56
I/O TEST
: 1234 [ON : RED]
}
: ON
: 1 [LEFT]
ENTER SW: ENTER
(see 6-2-3-1 page 57)
(see 6-2-3-2 page 58)
(see 6-2-3-3 page 61)
(see 6-2-3-4 page 62)
(see 6-2-3-5 page 63)
(a)
(b)
(c)
(d)
(e)
(f)
(g)