NAMCO TIME CRISIS 4 DX Manual Del Operador página 87

4. Remove 4off Whizz nut (M3) and remove the CPU Board.
Whizz nut (M3)
5. Reassemble in reverse order.
• It is important that the Dip Switches are set correctly for STD an DX versions of
this game.
The settings should be:
STD Sw 1 ON
Sw 2 OFF
DX Sw 1 ON
Sw 2 ON
•
After replacing the CPU Board, be sure to Initialize the Guns.
(see 6-2-3-2 page 58)
•
If the player 2's CPU Board has been replaced, ensure that the Frequency
Changeover Connector has been refitted. If this connector is not fitted, the gun
assy detection system may be confused with the player 1 CPU Board and the
game will fail to operate correctly.
Whizz nut (M3)
CPU board
Dip switch
87