Replacing The Fluorescent Tube / Starter - NAMCO TIME CRISIS 4 DX Manual Del Operador

7-8

Replacing the Fluorescent Tube / Starter

•
The fluorescent lamp may be hot. Take care when removing the fluorescent
lamp.
• Take care when replacing the fluorescent lamp or starter, as the work must be
conducted at height.
1 Remove six off countersunk flat head screws (M5x8), 6off panel washers, and remove
the Header Panel.
2. Replace the Fluorescent Tube and/or Starter.
Countersunk flat head screws (M5 x 8)
Panel washers
3. Reassemble in reverse order.
Countersunk flat head screws (M5 x 8)
Starter
Panel washers
Header panel
Header Assy
Fluorescent lamp
81