Fitting The Joint Box - NAMCO TIME CRISIS 4 DX Manual Del Operador

4-3

Fitting the Joint Box

1. Join the two Monitor Cabinets together at the rear with the supplied Flange socket bolt
(M8x40) and whizz nut (M8).
Monitor Cabinet Assy (R)
(rear side)
2. Fit 2off flange socket bolts (M8x40) to the upper front fixings on the front of the
Projector Cabinets leaving approx 5mm protruding.
Monitor Cabinet Assy (L)
(front side)
Monitor Cabinet Assy
Approx. 5mm
38
Whizz nut (M8)
Flange socket bolts (M8 x 40)
Monitor Cabinet Assy (L)
(rear side)
Flange socket bolts (M8 x 40)
Monitor Cabinet Assy (R)
(front side)
Joint Spacer