Replacing The Amp Pc Board - NAMCO TIME CRISIS 4 DX Manual Del Operador

7-6

Replacing the Amp PC Board

•
The Amp PC Board can be damaged by static electricity.
Before handling the AMP Board, always touch an earthed metal surface to
discharge any static electricity.
1. Remove the Front door.
2. Disconnect the five connectors. Remove 5off pozi head screws (M3x6), with flat and
spring washers, and remove the Amp PC Board.
Pozi head screw
(M3 x 6)
(with both flat and
spring washers)
AMP PC board
3. Reassemble in reverse order.
78
(see 7-3 page 74)
Connector (yellow)
Connector
Connector
Pozi head screw (M3 x 6)
(with both flat and spring washers)
Connector (red)
Connector (white)