NAMCO TIME CRISIS 4 DX Manual Del Operador página 72

3. Remove 4off whizz nuts (M4) retaining the Holder. While holding the Plunger in,
remove the holder with plunger.
Note:The plunger is spring loaded, take care that the plunger and spring do not fly
off.
4. Wipe away any old grease from the Plunger and Plate surface on the Pedal.
5. Apply a light grease to the Plate and spherical surface of the Plunger.
Microswitch
Whizz nut (M4)
6. Reassemble in reverse.
Note: After reassembly, check the operation of the Pedal Assy.
(see 6-2-3-3 page 61)
72
Holder
Plunger
Whizz nut (M4)
Plate
Gease Here