Replacing The Pedal Potentiometer - NAMCO WANGAN MIDNIGHT Manual Del Operador

8-14 Replacing the Pedal Potentiometer

1. Remove the pedal asembly.
2. Slacken the hex socket screw (M4x8) and remove the potentiometer complete
with potentiometer bracket.
Ground lead
Whizztite Nut
Connector
Cable clip
Connector
3. Replace the potentiometer ensuring that the correct colour wires go to the
correct terminals.
Potentiometer
Note: When replacing the potentiometer
ensure that the hex socket screw engages
on the flat of the potentiometer shaft.
4. Reassemble in reverse order.
Note: After replacing the potentiometer ensure that the game is re-initialized.
(see section 7 page 59)
(see 8-13 page 76)
Accelerator pedal Assy
Hexagonal nut
Flat washer
Potentiometer bracket
Page 77
Hexagonal
wrench
Hex socket screw (M4 x 8)
Potentiometer bracket
Accelerator pedal
Assy
Potentiometer
1 2 3
Spring
washer
White White White
/black /blue /red
Brake pedal Assy
Brake pedal
Assy
Potentiometer
1 2 3
White White White
/black /blue /red