Fitting The Header Assembly - NAMCO TIME CRISIS 4 DX Manual Del Operador

4-4

Fitting the Header Assembly

The Header Assembly weighs approx 20kg. Ensure that at least two people are
used to fit the Header Assembly.
The fitting position of the Header Assembly is very high, and it is important that
a safe means of reaching the height safely, without stretching is available. (e.g.
steps, step stool etc.)
1. Loosen only 3off crews (M6x20), with flat and spring washers on both sides of the
Monitor Cabinet top. Slide the Speaker Box Assy (L) to the front, and retighten the 6off
Screws (M6x20), with flat and spring washers, previously loosened
2. Repeat for the Speaker Box Assy (R).
Speaker Box Assy (R)
Monitor Cabinet Assy (R)
Monitor Cabinet Assy (L)
40
l
Speaker Box Assy (L)
Screw (M6 x 20)
.
Screws (M6 x 20)
Retaining Plate