Required Dimension For Access (Doors And Passageways) - NAMCO TIME CRISIS 4 DX Manual Del Operador

4-1

Required Dimension for Access (Doors and Passageways)

The machine is separated into the following assemblies for transportation. The size of each
assembly is as follows:
Monitor Cabinet (L)
Monitor Cabinet (R)
Control Assembly
Header Assembly
Jointbox
Pedal Assembly (x2)
If the access route is too low for the machine's height, the Speaker Box Assy can be
temporarily separated from the Monitor Cabinet to reduce the height to 1860cm.
(See 4-2 page 37)
Furthermore the Projector can be separated from it's base.
Projector 1140 (W) x 560 (D) x 1,410 (H) mm
Projector base 1140 (W) x 740 (W) x
For the method of separating the Projector from it's base, refer to (4-3 page 38.)
Signboard Assy
Joint Assy
Pedal Assy
160
36
1210(w) x 770(d) x 2010(h)
1210(w) x 770(d) x 2010(h)
1520(w) x 540(d) x 1120(h)
1330(w) x 390(d) x 340(h)
500(w) x 290(d) x 230(h)
250(w) x 250(d) x 160(h) (ea)
920 (H) mm
Speaker Box (R)
[ (L)] Assy
Control Assy
Weight 210kg
Weight 200kg
Weight 75kg
Weight 20kg
Weight 6kg
Weight 6kg (ea)
Weight: 100 kg
Weight: 100 kg
Projector (R) [ (L)] Assy