5-4
Adjusting for Coin Acceptance
5-4-1
Adjustment of the Coin Acceptors
The following details describe the procedure for removing the Coin Acceptor (R).
Follow the same procedure for the removal of Coin Selector (L)
1.
Remove 4off tork screws (M5x12).
Underpanel
Torx screws (M5 x 12)
2.
Unlock and open the Coin door, and remove the underpanel by sliding it
towards the back.
Whizznuts (M4)
3.
Remove 8off whizznuts (M4) and remove the Armrests (L) and (R).
Torxscrews (M5 x 12)
Armrest (L)
Page 47
Armrest (R)