4- Rotating The Outlet Chute; 5- Moving The Deflector - Nogueira NEW PECUS Duo G2 Manual De Instrucciones

4.7.4- Rotating the outlet chute

The turning movement of the outlet chute
is performed by a worm drive, driven by a
hydraulic motor. This feature allows you to
position the chute for the discharge in the
desired direction.
To rotate the outlet chute:
Press and hold the 'TURN THE CHUTE'
1.
button on the Joystick (see the figure
beside).
Move the tractor's hydraulic control lever.
2.
NOTE!
The side to which the lever is moved
(forward or backward) determines the
direction of rotation of the chute. Take
a test and observe.

4.7.5- Moving the deflector

The deflector (A) is moved by the hydraulic
cylinder (B), driven through the tractor's
hydraulic system. To direct the jet of chopped
crop, position the deflector by using the
Joystick.
To adjust the deflector:
Press and hold the 'MOVE THE DEFLECTOR'
1.
button on the Joystick (see the figure at
the side).
Move the tractor's hydraulic control lever.
2.
NOTE!
The side to which the lever is moved
(forward or backward) determines
whether the deflector will rise or fall.
Take a test and observe.
MOVING THE
DEFLECTOR:
Instructions Manual
4. Preparation
TO TURN
THE CHUTE
JOYSTICK
JOYSTICK
63