Final Adjustment - Nogueira SOFT 600 Manual De Instrucciones

When adjusting the back doser, counting the holes is always from the left to
right. When making the adjustment, do not forget this important detail. Incorrect
counting direction can completely change the adjustment and affect the
performance of the machine.
IMPORTANT

Final adjustment

There are several factors which can affect the spreading results, such as: the quality of the products
being spread, climatic conditions etc. After adjusting the machine, we recommend performing a test
run:
Turn on the machine and spread for a few meters and observe the results. If, the spreading is
concentrated to one of the sides, proceed as follows:
Spreading more towards the left side:
Turn the disc two holes towards the right
side.
DISC
Change the position of the shaft two holes
towards the left side.
SOFT 600 / 900
SHAFT
23