Safety Precautions - Nogueira SOFT 600 Manual De Instrucciones

Safety

SAFETY PRECAUTIONS

- Read the instruction manual before turning on
the machine. Pay close attention and respect all
the operating and safety recommendations
while operating. SHARE THIS INFORMATION
WITH OTHER USERS.
- Do not operate the machine while or after
drinking alcoholic beverages or medications
which affect your normal condition. Pay
attention to what you are doing and use your
good sense. Any lack of attention while
operating the machine can result in a serious
accident.
- Disconnect from the power take-off, the tractor
motor, and remove the key from the ignition
before performing any adjustment, lubrication,
or any maintenance job on the machine. Never
try to perform any repairs while the machine is
turned on. Always pay complete attention!
- Before turning on the machine, check to see if
there are no tools or any other object on it.
- Look around the machine before operating it.
Keep animals and spectators at a safe distance
away from the power supply area. Pay special
attention to any children nearby.
- Check the spreading distance of the product
and keep animal and spectators away from the
spreading area.
- Dress appropriately for operating the machine.
Keep long hair tied up and do not wear loose-
fitting clothing. Remove rings, chains, and any
other objects which can become stuck in the
moving parts or mechanisms.
- Wear personal protective equipment - PPE -
while operating the machine. Exposure to noise
for prolonged period can cause hearing damage
or loss. Wear earplugs and safety glasses.
10
Instructions Manual
- Never try to clean or remove remnants of
products while the machine is turned on. This
type of procedure can only be done while the
power take-off is disconnected, the key removed
from the ignition, and the machine is completely
motionless.
- Never touch the spreading disc when the
machine is turned on. Keep your hands away
from moving parts.
- Keep the safety labels in good condition and
legible. Replace them whenever necessary.
- Keep the shielding and protections in the
proper places and do not operate the machine
without them being installed.
- It is prohibited for people to stand on any part of
the machine while operating. Whenever it is
necessary to get on the machine for any
adjustment or repair, disconnect the power take-
off from the tractor and wait until the
components/parts are completely motionless.
- Moving parts, due to inertia, continue moving
even after the machine is turned off. Before
touching any part, disconnect the power source,
look and listen to check for any evidence of
movement. Only touch a part after you are sure
is it motionless. Always pay attention!
- Completely lower the machine before
performing maintenance, lubrication or
adjustments.
- If it is necessary to work on the machine when it
is raised by the hydraulic system, it must be
raised safely. Hydraulic mechanism can lower
without any reason or from leakage in the
system, and cause an accident.
- Do not place the machine on cement blocks,
hollow bricks, or other supports which can crush
from a prolonged weight load.