Ce Declaration Of Conformity - King gates OVO Instrucciones Y Advertencias Para La Instalación Y El Uso

Incorporated radio receiver technical specifications
Type
Frequency
Coding
Transmitter compatibility (*)
No. of transmitters that can be
memorised
Input impedance
Sensitivity
Range of the transmitters
Outputs
Working temp.
10.

CE Declaration of conformity

Declaration of conformity as per Directive 2004/108/CE (EMC)
Declaration code: K101/OVO
Rev.: 0.
:
Language EN
Manufacturer's name: KING GATES S.r.l.
DIRECTIVE 1999/5/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 9 March 1999 on radio equipment and telecommunications terminal equipment and the mutual
recognition of their conformity, in accordance with the following harmonised standards:
- Health protection: EN 50371:2002
- Electrical safety: EN 60950-1:2006+A11:2009
- Electromagnetic compatibility EN 301 489-1 V1.8.1:2008, EN 301 489-3 V1.4.1:2002
- Radio spectrum: EN 300 220-2 V2.3.1:2010
• DIRECTIVE 2004/108/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 15 December 2004 on the approximation of the laws of the Member States relating to
electromagnetic compatibility and repealing Directive 89/336/EEC, in accordance with following harmonised standards.
EN 61000-6-2:2005, EN 61000-6-3:2007
In addition, the product conforms with the following Directive on partly completed machinery:
• Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC (recast), in accordance with the following
harmonised standards:
- It is hereby declared that the relevant technical documentation has been compiled in accordance with Annex VII Part B of Directive 2006/42/CE and that the following essential
requirements have been applied and fulfilled: 1.1.1- 1.1.2- 1.1.3- 1.2.1-1.2.6- 1.5.1-1.5.2- 1.5.5- 1.5.6- 1.5.7- 1.5.8- 1.5.10- 1.5.11
- The manufacturer undertakes to transmit, in response to a reasoned request by the national authorities, relevant information on the partly completed machinery. This shall be
without prejudice to the intellectual property rights of the manufacturer of the partly completed machinery.
- Should the partly completed machinery be put into service in a European country with an official language different to the one used in this declaration, a translation into that
language must be provided by the person bringing the machinery into the language area in question.
- The partly completed machinery must not be put into service until the final machinery into which it is to be incorporated has been declared in conformity with the provisions of
Directive 2006/42/CE, where appropriate;
In addition, the product GD0N complies with the following standards: EN 60335-1:2002 + A1:2004 + A11:2004 + A12:2006 + A2:2006 + A13:2008+A14:2010; EN 60335-2-95:2004
The product complies with the following standards (limited to the applicable sections): EN 13241-1:2003, EN 12445:2002, EN 12453:2002, EN 12978:2003
Sacile, 19-06-2012
20
4 channel receiver for incorporated radio command
433.92 MHz
King
Clipper, Stylo 4, Stilo 4K, Myo C4, Novo TX and Novo Digy
Up to 160 if memorised in mode 1
52Ω
better than 0.5µV
From 100 to 150m. The range can vary if there are obstacles or electromagnetic disturbances,
and is also affected by the position of the receiving aerial
/
-20°C ÷ 55°C
Address: Via Malignani, 42 - 33077 - Sacile (PN) Italy
Type: Electromechanical gearmotor with incorporated control unit
Model: OVO
Alex Antoniolli
(Managing Director)