Tabla de contenido
Idiomas disponibles
Idiomas disponibles
1.
General warnings
1.1 -
Safety warnings
CAUTION!
- This manual contains important safety instructions and
warnings. Incorrect installation can lead to serious injury. Be-
fore starting, please read all sections of the manual carefully. If
you are unsure about something, stop installation immediately
and contact KING-gates Customer Service for assistance.
- Important: please retain this manual for future maintenance
work and product disposal.
1.2 -
Installation warnings
• Before beginning the installation procedure, check that this prod-
uct is suitable for its intended use. If it is not suitable, DO NOT con-
tinue with the installation.
The contents of this manual refer to an installation like the one shown
in fig. 2.
• Considering the risk situations that may arise during installation
phases and use of the product, the automation must be installed in
observance of the following warnings:
- Ensure there is a system device which is a means of disconnection
from the supply mains. This device must have a contact separation in
all poles which ensures full disconnection under overvoltage category
III conditions.
- All installation and maintenance operations must be carried out
with the automation system switched off and the power supply dis-
connected. If the disconnection device is not visible from where the
automation system has been installed, a sign must be attached to
it before attempting any work. The sign should read: "WARNING!
MAINTENANCE IN PROGRESS".
2.
Description of the product
Dynamos is a line of irreversible electromechanical gearmotors for automating sliding gates.
The Dynamos product line includes the following products (table 1).
Table 1: comparison of basic specifications of Dynamos gearmotors
Gearmotor type
Type of limit switch
Max. gate length
Max. gate weight
Peak thrust
(corresponding to force)
Motor
- The product must be connected to a power supply line equipped
with safety grounding system.
- Take care not to crush, bang, drop or spill any kind of liquid on the
automation system during installation. Keep the product away from
sources of heat and naked flames. Failure to observe the above can
damage the product, and increase the risk of danger or malfunc-
tion. If this were to happen, stop installation immediately and contact
KING-gates Customer Service.
- Do not make alterations to the product in any way. Operations other
than as specified can only cause malfunctions. The manufacturer de-
clines all liability for damage caused by makeshift modifications to
the product.
- This product is not intended for use by people (including children)
with reduced physical, sensory or mental capabilities or who lack
experience and knowledge, unless they have been given supervision
or instruction concerning the use of the product by a person respon-
sible for their safety.
- The product is not intended as an intruder protection system. If an
efficient protection system is required, the automation must be inte-
grated with other devices.
- Do not allow children to play with the fixed control devices. Keep
remote control devices out of their reach as well.
- The packing materials of the product must be disposed of in com-
pliance with local regulations.
Dynamos XL1800
electromechanical
15 m
1800 kg
40 Nm
1120 N
DC motor 24V 700 W max
Dynamos XL2500
electromechanical
18 m
2500 kg
50 Nm
1390 N
Asynchronous single-phase 870 W max
3
Tabla de contenido
