− 2.3.2.- HGC
− Position control 4 in one of the two positions 6. The chamber light stays on and pilot lamp 2
comes on (Fig. 7).
− The temperature is selected by means of control 7 (Fig. 7). This varies between 30÷270 ºC.
− The indication display 8 (Fig.7), displays the temperature in the oven chamber.
− The pilot lamp 1 (Fig. 7) comes on when the burner is in operation.
− The pilot lamp 3, comes on when button 12 (Fig. 7) is pushed.
− Time is selected by means of control 9 (Fig. 7). This allows times of from 0 to 120 minutes to
be selected by turning the control clockwise.
− When the control is turned anticlockwise to position 11 (Fig. 7) (Manual), the oven will
operate continuously.
− When the door is opened the oven will turn off, but the timer will continue counting. When
the door is shut the over will continue working.
− When the timer reaches zero, the oven stops and a bell rings.
− By turning control 4 (Fig. 7) to position 5, the oven switches off.
− As measure of security the maker advises to close the key in passing of water after using the
oven.
27