Maintenance And Care; Disassembly And Repair; Disposal; Accessories - Festo DNCKE S Serie Instrucciones De Utilizacion

DNCKE−...−S / KEC−...−S
8

Maintenance and care

WARNING
Unexpected movement of components.
Injury due to impacts or pinching.
• When working on the clamping unit, switch off the controller and secure it against
being switched back on unintentionally.
• Clean the clamping unit as required with a soft cloth. Do not use aggressive cleaning agents.
• The clamping unit is lubricated for life. Additional lubrication is not necessary.
9

Disassembly and repair

WARNING
Unexpected movement of components.
Injury due to impacts or pinching.
• Secure payload and verify load-free status before dismantling.
• When working on the clamping unit, exhaust it beforehand.
• Observe notes on transport (è 4 Transport).
WARNING
Parts flying through the air!
Injury due to impacts or pinching.
Pre-stressed springs may be ejected suddenly during dismantling. Sudden release of
internal spring forces (e.g. when dismantling the housing cover) may cause injury.
• Do not dismantle clamping unit.
If repairs are required:
• Send clamping unit to Festo or contact Festo service (è www.festo.com).
Information about spare parts and auxiliary means (è www.festo.com/spareparts).
10

Disposal

• Dispose of packaging and clamping unit at the end of its useful life through environmentally friendly
recycling in accordance with applicable regulations.
11

Accessories

è www.festo.com/catalogue
50 Festo – DNCKE−...−S / KEC−...−S – 1511b English