Configuration - Festo DNCKE S Serie Instrucciones De Utilizacion

DNCKE−...−S / KEC−...−S
1

Configuration

DNCKE-...-S
4 3
5 6 7
1
Compressed air supply port for cylinders next
to the adjusting screws for the pneumatic
cushioning (only for DNCKE)
2
Compressed air supply port for loosening
the clamp
3
Locking screw with hex key (for adjusting
sleeve)
4
Piston rod (only DNCKE)
Fig. 1
Definition
In these operating instructions, the designation
"clamping unit" is used for:
– the individual product KEC
– the design type DNCKE integrated in
the cylinder
In these operating instructions, the designation
"round material" is used for:
– the transport lock for KEC
– the piston rod for DNCKE
Festo – DNCKE−...−S / KEC−...−S – 1511b English
2
8 9
KEC-...-S
1
5 6 7 3
5
Adjusting sleeve with spanner flat
6
Hollow bolt with thread for mounting
7
Hole with filter element for exhausting
the clamping chamber
8
Slots for proximity switch (only DNCKE)
9
Round material for transport protection
(only KEC)
KEC
Fig. 2
2
DNCKE
31