Dismantling Of The Round Material (Only Required For Kec) - Festo DNCKE S Serie Instrucciones De Utilizacion

DNCKE−...−S / KEC−...−S
6.1

Dismantling of the round material (only required for KEC)

1. Pressurize the supply port 2 with at least
3.8 bar.
2. Loosen the locking screw 3 with a hex key
wrench.
Size
Width across flats for hex key 3 ß
Tab. 5
3. Loosen the adjusting sleeve 5 half a turn in
an anti-clockwise direction
4. Pull supplied round material 9 out com­
pletely.
Note
If the round material is inserted
tilted, it may damage the wiper and
the seals.
• A 15°-chamfer at least 3 mm
wide at the end of the round
material ensures it can be
pushed on without a problem
(rod quality
è 13 Technical data).
5. Push the clamping unit carefully onto the rod of the plug-in product.
6. Adjust the KEC to the new round material (è Following chapter).
Festo – DNCKE−...−S / KEC−...−S – 1511b English
2
Fig. 13
DNCKE 40
KEC 16
[mm] 6
5
Fig. 14
Fig. 15
3
63 100
20 25
8
9
41