Idiomas disponibles
Idiomas disponibles
... Sound menu
Sound
Sound Mode
Standard
Headphone
Sound Mode Settings
Speakers
SOUND MODE
Select the desired mode here: STANDARD, THEATRE,
MUSIC, SPEECH, LATE NIGHT, SPORTS. This option is
not available when using the headphone mode setting
HEADPHONE ONLY.
HEADPHONE
You can set the sound mode for the headphone output
here. This option is only available when headphones are
connected.
– HEADPHONE MODE
Select the desired headphone mode: HEAD
PHONE WITH SPEAKERS, HEADPHONE
ONLY, AUDIO OUT WITH SPEAKERS
– HEADPHONE VOLUME
Set the volume for the headphones (on a scale
of 0 to 100)
Risk of hearing damage!
To prevent possible damage to your
hearing, avoid listening at high volume
over long periods of time.
Before pressing play, set the volume
to the lowest setting.
Start playback and increase the vol-
ume to a comfortable level.
SOUND MODE SETTINGS
– APPLY AUDIO SETTINGS
Choose whether to apply the settings only to
the currently selected input source or to all in-
put sources. This option is not available when
using the headphone mode setting HEAD
PHONE ONLY.
– EQUALIZER
Here you can make individual sound adjust-
ments in the frequency range of HZ,
HZ, . KHZ, KHZ and KHZ. You can
also reset the settings to their factory settings.
This option is not available when using the
headphone mode setting HEADPHONE
ONLY.
– WALL MOUNT SETUP
Activate/deactivate the wall mounting setup
option for improved sound reproduction with
wall-mounted devices. This option is not avail-
able when using the headphone mode setting
HEADPHONE ONLY.
– AUTO VOLUME CONTROL
This function sets the sound so that a con-
stant output volume is maintained between
programmes. When deactivated, you will hear
the original volumes. When activated, you will
hear a steady volume. This option is not avail-
able when using the headphone mode setting
HEADPHONE ONLY.
– RESET CURRENT MODE
You can reset the picture settings to their fac-
tory settings here.
SPEAKERS
– AUDIO OUTPUT
Select the desired audio output: BLUETOOTH
SPEAKER, ARC, TV SPEAKER, SPDIF ONLY
– DIGITAL AUDIO OUTPUT
(only available with ARC and SPDIF)
Set the audio type for the digital output here.
– DIGITAL AUDIO DELAY
(only available with ARC and SPDIF)
Set a delay for digital output here.
– LIP SYNC
Use this option to compensate for the time off-
set between the sound and picture signal. This
option is only available when the TV speakers
are activated.
– BALANCE
Set the balance between the left and right
speakers (on a scale of -50 to +50). This option
is only available when the TV speakers are ac-
tivated.
EN
25
