Idiomas disponibles
Idiomas disponibles
... Satellite
.
Make sure that your satellite cable is connec-
ted to the LNB IN connection.
Satellite System
Single Satellite
DiSEqC
Unicable
The following options are then available:
SINGLE SATELLITE
Select the required satellite here. You can start automatic
satellite detection here and also display the signal quality
and signal level of the displayed satellite. Under ANTEN
NA SETUP, the LNB FREQUENCY can be set for the
selected satellite.
Press the button.
Then select the desired channel: ALL CHANNELS,
FREE CHANNELS
Then press the button to start the scan.
Confirm with DONE to complete the process.
DISEQC
If you have connected multiple LNBs or a DiSEqC switch to a
satellite antenna, select the required DiSEqC setting here.
DISEQC .
– DISEQC MODE
In DiSEqC mode DISEQC ., you can also start
automatic satellite detection with the SATELLIT
AUTO DETECT option. If you press the but-
ton, the following options will be available.
SATELLITE
Select the desired satellites for the correspon-
ding DiSEqC switch here.
CHANNEL
Select ALL CHANNELS or FREE CHANNELS
here. This option may not be available depen-
ding on the country/region/provider.
SEARCH MODE
Select the desired search mode FREQUENCY
SCAN or QUICK SCAN.
– DISEQC A / B / C / D
The signal quality and signal level of the corre-
sponding satellites is displayed.
The following options can be edited under
ANTENNA SETUP. If you press the button,
the following options will be available.
SATELLITE
Select the desired satellites for the correspon-
ding DiSEqC switch here.
14
Auto Channel Scan
– DISEQC MODE
– SATELLITE
CHANNEL
Select ALL CHANNELS or FREE CHANNELS
here. This option may not be available depen-
ding on the country/region/provider.
SEARCH MODE
Select the desired search mode FREQUENCY
SCAN or QUICK SCAN.
LNB
Activate/deactivate the op-
POWER
tion LNB power
Select the desired satellites
SATELLITE
for the corresponding DiSE-
qC switch here.
Select the desired LNB
LNB FRE
frequency for the selected
QUENCY
satellite.
TONE
For this option, select OFF,
KHZ
BAND or POSITION.
TONE
For this option, select OFF,
BURST
POSITION or OPTION.
For this option, select
REPEAT
NONE, or .
DISEQC .
In DiSEqC mode DISEQC ., you can call up
the following options for moving the motor
of your satellite system by pressing the
button.
MOVE WEST
Start rotation westwards.
STOP MOVEMENT
Stop rotation.
MOVE EAST
Start rotation eastwards.
MOVE TO NULL POSITION
Start rotation to zero position.
SET BORDERS
Set limits for the rotation.
STORE CURRENT POSITION
Saves the current satellite position.
The signal quality and signal level of the
corresponding satellites is displayed. Under
ANTENNA SETUP you can configure the fol-
lowing settings.
MAIN FREQUENCY
Use the number buttons to enter the base
frequency.
SYMBOL RATE
Use the number buttons to enter the symbol
rate.
POLARIZATION
Select a setting for the polarisation.
LNB FREQUENCY
Select the desired LNB frequency for the se-
lected satellite.
