Idiomas disponibles
Idiomas disponibles
. Getting started
.
Before using for the first time, ensure you read
the "Safety instructions" section.
.. Unpacking
•
Select a suitable place for setting up the device before
unpacking.
•
Open the box very carefully, to avoid damaging the
device. The device might get damaged if you use a
knife with a long blade to open the box.
•
Completely remove the packaging material.
•
The box contains a number of small items (including
batteries). Keep these out of the reach of children, as
they represent a choking hazard.
•
Store the packaging material in a safe place. Only use
this box to transport the TV.
DANGER!
Risk of choking and suffocation!
Packaging film can be swallowed or
used improperly, creating a risk of
choking and suffocation.
Keep packaging material such as
plastic film or plastic bags away
from children.
.. Mounting
Attach the feet as shown in the illustration. Carry out this
step before connecting the Smart TV.
4 x BA4.0x18.00mm
4 x PM5.0x16.00mm (MD31644)
.. Inserting batteries in the remote
control
Remove the battery compartment cover on the back
of the remote control.
Insert two LR03 (AAA) 1.5 V batteries in the battery
compartment of the remote control. Check the battery
polarity (see label on the bottom of the battery com-
partment).
Close the battery compartment.
NOTICE!
Risk of damage!
The remote control can be damaged
by leaking batteries if not used for a
long period of time!
Remove the batteries from the re-
mote control if the device is not go-
ing to be used for a long period.
.. Connecting the antenna
Your LCD TV supports different antenna signals. You
can input the following image signals to the television
through the socket labelled A N T Ω :
•
Via analogue cable/an analogue house aerial
1
•
Via a DVB-T/DVB-T2
antenna or
•
Via a DVB-C
1
connection
Insert the antenna cable either from the house aerial/
analogue cable connection, a DVB-T antenna or the
DVB-C connection in the antenna socket on the LCD
TV.
You also have the option of connecting a digital satellite
system to the socket labelled L N B .
Screw a coaxial antenna cable's F connector onto the
connector on the Smart TV.
.
If you want to watch encrypted channels, or
subscription channels, you must use a suitable
card. Insert a CAM module (available in specia-
list shops) in the slot provided for this purpose
on the left-hand side of the device (C O M
M O N I N T E R F A C E ). You can then insert
your provider's card in the CAM module.
1
This service must be available in your region
EN
11
