Idiomas disponibles
Idiomas disponibles
Never rely solely on the safety equipment integrated
in the chainsaw.
As a chainsaw user, take various measures to work
without accidents and injuries.
Kick-back is the result of incorrect or deficient use.
It can be prevented by suitable precautionary meas-
ures, as described in the following:
• Hold the saw firmly with both hands, with the
thumbs and fingers enclosing the chainsaw
handles. Bring your body and arms into a po-
sition in which you can absorb the kick-back
forces. If suitable measures are implemented, the
operator will be able to withstand the kick-back
forces. Never let go of the chainsaw.
• Avoid an unusual body stance and never saw
above shoulder height. This will help to avoid
unintentional contact with the rail tip, and enable
improved control of the chainsaw in unexpected
situations.
• Always use replacement guide rails and saw
chains prescribed by the manufacturer. Incor-
rect replacement guide bars and saw chains may
cause the saw chain to break and/or lead to kick-
back.
• Adhere to the instructions of the manufactur-
er when sharpening and maintaining the saw
chain. If the depth limiter is too low, this increases
the tendency towards kick-back.
• Do not saw with the tip of the guide bar. There is
a risk of kick-back.
• There is a risk of kick-back.
• Make sure that there are no objects on the floor that
you can trip over.
• Remove branches in sections.
• Warning! Be careful with dangerous working
positions.
5.5 Residual risks
Even when used correctly and in compliance with all
safety regulations, there may still be residual risks.
• Cuts
• Hearing damage
• Staying in the immediate vicinity of the running de-
vice for a longer period of time may cause hearing
damage. Wear hearing protection!
• Damage to health resulting from hand/arm vibra-
tion if the device is used over an extended period of
time or if it is not properly operated and maintained.
• Vibration dampening systems do not guarantee
protection against Raynaud syndrome or carpal
tunnel syndrome. For this reason, the condition of
the fingers and the wrist must be thoroughly mon-
itored in case of regular, continuous use of the de-
vice. If symptoms of the illnesses indicated above
occur, contact a doctor immediately. To reduce the
risk of Raynaud syndrome, keep your hands warm
while working and take breaks at regular intervals.
48 | GB
• Despite observing the operating manual, there may
also be residual risks that are not obvious.
• In the event of a saw chain blockage, switch the
device off immediately and pull out the spark plug
connector. Then remove the object.
6. Technical data
Drive
Displacement
Rated engine power
Idle speed
Fuel tank volume
Type of motor
Motor unit weight
Weight of motor unit
with grass trimmer
Weight of motor unit
with brush cutter
Weight of motor unit
with pole-mounted
pruner
Weight of motor unit
with hedge trimmer
Grass trimmer cutting data
Cutting diameter
Thread count
Thread length
Max. grass trimmer
speed
Maximum motor speed
with grass trimmer n
Brush cutter cutting data
Cutting diameter
Cutting blade thickness
Mounting hole diameter
Number of teeth
Max. brush cutter speed
Hedge trimmer cutting data
Cutting diameter
Guide bar angle
adjustment
Cutting length
Maximum motor speed
with hedge trimmer n
www.scheppach.com
52 cm³
1.4 kW
3200± 300 rpm
1200 cm³
2-stroke engine, air-
cooled
4.0 kg
7.3 kg
7.3 kg
7.5 kg
7.9 kg
420 mm
2 x 2.5 mm
4 m
6600 rpm
9000 rpm
max
255 mm
1.4 mm
25.4 mm
10000 rpm
24 mm
+ 90° / 0° / -75° (165°)
390 mm
10000 rpm
max
3
