Avoid passing over puddles. If the work surface is wet, you can use the machine
only by turning off the suction fan (fig. C, ref. 2) as damp/wet dirt reduces the
performance of the suction filter.
Emptying the debris bin:
Before emptying the bin, make sure all machine functions are turned off;
When emptying the bin, always wear a mask to protect the respiratory tract from
the dust which is always present during this operation.
Front bin:
•
Use the handle to release the bin (fig. B, ref. 12) 512-712.
•
Use the handle to release the bin (fig. B, ref. 13) 512-712 RIDER.
•
Grip the bin and slide it out
•
Empty the bin.
•
Replace the bin.
•
Use the handle to block the bin in place (fig. B, ref. 12) 512-712
•
Use the handle to block the bin (fig. A, ref. 13) 512-712 RIDER
Rear bin:
•
Release the bin by lifting and turning the two clips (fig. B, ref. 13) 512-712.
•
Release the bin by lifting and turning the two clips (fig. A, ref. 14) 512-712 RIDER.
•
Grip the bin and remove it from the machine.
•
Empty the bin.
•
Replace the bin.
•
Block the bin in place by turning the two clips and pressing them when in position.
Stopping:
•
Move the machine to the parking area
•
Stop the machine by releasing the handle (fig. B, ref. 9) 512-712, releasing the
accelerator knob (fig. A, ref. 9) 512-712 RIDER.
•
Turn off the brushes using the button (fig. C, ref. 3) 512-712 RIDER .
•
Stop suction (fig. C, ref. 9) 512-712
•
Lift the side brush using the lever (fig. A/B, ref. 11).
•
Turn the key switch (fig. C, ref. 1) to the "0" position.
IMPORTANT
IMPORTANT
ENGLISH
16
