Idiomas disponibles
Idiomas disponibles
HAZARD:
EXPLOSION OR FIRE - Solvent and paint fumes
can explode or ignite, causing property damage
and/or severe injury.
PREVENTION:
• Exhaust and fresh air introduction
must be provided to
keep the air within the spray area free from accumulation
of f[ammabie vapors.
• Avoid all ignition sources such as static electricity sparks,
open flames, pilot lights, hot objects, cigarettes, and
sparks from connecting and disconnecling
power cords or
working light switches.
• Fire extinguishing
equipment must be present and in good
working order
• Follow the material and solvent manufacturer's safety
precautions and warnings.
HAZARD:
EXPLOSION DUE TO INCOMPATIBLE
MATERIALS - May cause property
damage or
severe injury.
PREVENTION:
• Do not use bleach.
• Do not use haIogenated hydrocarbon solvents such as
methylene chloride and 1,1,t - trichloroethane.
They are
not compatible with aluminum and may cause an
explosion. If you are unsure of a material's compatibility
with aluminum, contact your coating supplier.
HAZARD:
HAZARDOUS VAPORS - Paints, solvents,
insecticides,
and other materiels may be
harmful if inhaled, causing severe nausea,
fainting,
or poisoning.
PREVENTION
• Use a respirator or mask whenever there is a chance that
vapors may be inhaled.
Read all instructions with the
spray material and mask to ensure that it will provide the
necessary protection
against the inhalation of harmful
vapors.
• Use eye protection to keep hazardous vapors out of eyes.
HAZARD:
GENERAL - May cause property damage or
severe injury.
PREVENTION:
• Read all instructions and safety precautions for equipment
and spray material before operating any equipment.
• Comply with all appropriate
local, state, and national
codes governing ventiIation, fire prevention, and operation.
• Keep sprayer out of the reach of children.
• Hearing protection is recommended for ex_ended use.
HAZARD:
ELECTRIC SHOCK HAZARD - May cause
severe injury.
PREVENTION:
• Keep electrical cord plug and spray gun trigger free from
paint and other liquids. Never hold core at plug
connections to support cord. Failure to observe may
result in an electrical shock.
CAUTION l
Use only a 3-wire extension cord that has a 3-bIade grounding
plug and a 3-slot receptacle that wilt accept the _iug on the
product.
Make sure your extension cord is in good condition.
When using an extension cord, be sure to usa one heavy
enough to carry the current your product wll draw. For lengths
less than 50 feet. use a No. 18 AWG extension cord. For
lengths more than 50 feet, use a No. 14 or No. 16 AWG
extension cold. An undersized cord will cause a drop in line
voltage resulling in loss of power and overheating.
Grounding
instructions
This product must be grounded• In the event of an electrical
short circuit, grounding reduces the risk of electric shock by
providing an escape wire for the eiectric current. This product
is equipped with a cord having a grounding wire with an
appropriate greunding plug. The plug must be plugged into an
outlet that is properly installed and grounded in accordance
with atl local ,;odes and ordinances.
,WARNING I
Danger!
Improper installation of the grounding plug can
result in a risk of electric shock.
If repair or replacement of the cord or plug is necessary, do not
connect the green grounding wire to either fiat blade terminal•
The wire with insulation having a green outer surface with or
without yellow stripes is the grounding wire and must be
connected to the grounding pin.
Check with a qualified electrician or serviceman if the
grounding instructions are not completely understood, or if you
are in doubt as to whether the product
is properly grounded•
Do not modify the plug provided.
If the piuj wilI not fit the
outlet, have the proper outlet installed by a qualified electrician.
This product s for use on a nominai 120 volt circuit and has a
grounding plug that looks like the plug illustrated below, A
temporary adapter which iooks like the adapter illustrated in
the figure below may be used to connect this plug to a 2 pole
receptacle as shown if a properly grounded outlet is not
available.
The temporary adapter should be used only until a properly
grounded outlet as shown below can be installed by a qualified
electrician.
The green colored rigid ear tug or the grounding
wire extending from the adapter must be connected to a
permanent ground such as a properly grounded outlet box
cover. Whenever the adapter is used, it must be held in place
by a metal screw.
Grounded Outlet---_
___
•
.
Ground ng Pn-_
_-,
-,Cover
for grounded outlet box
Metal Screw--',l_--_._,f
Adapter
_--J
_Tab
for
Grounding Screw
,re3 1997 Wagner Spray Tech - All rights reserved,
W/_lsnEn-
