Idiomas disponibles
Idiomas disponibles
Input the type of components
connected
to the digital input terminals
(_
_
Use the
_
(left) and
_
(right) buttons
to assign the input function connected
to the COAXIAL input {COAXIAL) terminal
(Initial)
[ +++ ..... +++1
(left) button
{right) button
4_._
• Select "OFF"
if nothing
is connected
Press the ENTER or _
(down) button
to switch
the optical input 1 (OPT 1)
setting
' C ++ + +++
a+ + ++ + + to a ss+
+ +t ++t++
co+e++
to the OPTICAL input 1 (OPT I ) terminal
(Initial)
[...."+'++
'
+'++1
{left) button
{right) button
(_4_
• Select "OFF"
if nothing
is connected
Press
the ENTER or _
{down) button
to switch
the OPTICAL input 2 (OPT 2)
setting
C ++++
+++++
+ ++ + + + + ++++++
++e+++
++ + ++ ,+++, '
1_2 , +,+,,+-+,
+.1.+ I
(left) button
(right) button
(_.
• Select "OFF"
if nothing
is connected
Press the ENTER or _
{down)
button
to switch
the auto
surround
mode
setting
NOTE:
• TUNER and V AUX cannot be selected
For the three
kinds of input signals
as shown
below,
the surround
mode
played the last is stored
in the
memory
At next time it the same signal inputs,
the memorized
surround
mode is automatically
selected
and
the signal is played
Note that the surround mode setting
is also stored separately for the different
input function
SIGNAL
Default Auto Surround
Mode
(i_
Analog and PCM 2-channel signals
STEREO
(.2_
2-channel signals of Dolby Digital, DTS or other multichannel
format
Dolby PL!I Cinema
(.3_
Mukichannel
signals of Dolby Digital, DTS or other multichannel
format
Dolby or DTS Surround
Use the
_
{left) and _
{right) buttons
to select the Auto Surround mode
(Initial)
f'iL._
] L_ ::,L_i'+:.f ':
(left) button
{right) button
Press the ENTER or _
(down) button to switch the Ext In SW Level setting
Set the method of playback of the analog input signal connected
to the Ext In terminal
*%
Use the
_
(left) and _
(right) buttons to select the Ext In Subwoofer
channel
Level playback
{Initial)
] _1 +,,ii+:,II+, I
_4 +.+.+.,...,,+ ........ .
_
{left) button
{right) button
Press the ENTER or _
{down) button
if you want to start the settings
over
from the beginning
_
Press the SYSTEM SETUP button to finish system set up
+%
This completes the system setup operations
Once the System is set up, there is no need to make the settings
again unless other components
or speakers are connected
to or the speaker layout is changed
12
