Braun Acculan 3Ti Instrucciones De Manejo/Descripción Técnica página 21

8. Troubleshooting list
Malfunction
Saw blade not moving
Insufficient cutting
performance of the
saw blade
Insufficient power
output
Motor not running
The saw blade cannot
be coupled
Saw blade cannot be
uncoupled
Detection
Loud running noise from
motor
Saw blade worn
Battery too weak
Battery worn/defective
Saw blade overheated
-
Symbol "Battery replace-
ment recommended"
illuminated on the char-
ger
-
No acoustic signal on
insertion of the battery
Coupling components or
saw blades deformed
-
Locking pin not fully
releasing the saw blade
Cause
Defective gearings
Blunt saw blade
Insufficient motor
power/speed
Inadequate chip removal
Battery not fully charged
End of service life of battery
Motor defective
Battery defective
Deformation
Incompatible saw blade
Button for saw blade release
not pressed completely
Remedy
Have repaired by manufac-
turer
Replace saw blade
Charge battery
Replace battery
Move the saw back and
forth during sawing and
ensure sufficient irrigation
of the saw blade
Charge the battery in the
charger
Have battery repaired by
the manufacturer
Have motor repaired by the
manufacturer
Have battery repaired by
the manufacturer
Have repaired by manufac-
turer
Insert a fitting Aesculap
saw blade, see Accesso-
ries/Spare parts
Fully press the saw blade
release button, see Uncou-
pling the saw blade
en
19