Emerson AVENTICS AV-EP Serie Instrucciones De Servicio página 24

1
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8
Fig. 1: AV-EP name plates for multipole connection (above), for fieldbus connec-
tion (below), without display (above), with display (below)
1 Data matrix code
3 Address
5 Production date
7 Device type
9 Pin assignment (M12 plug)
11 Safety sign: Hot surface
13 Series designation
15 Data length (SER)
The name plates shown for AV-EP pressure regulators are examples.
1. Check the part number on the name plate to determine whether the AV-EP
pressure regulator matches your order.
2. If necessary, check that the base plate matches your order using the material
number on the AV-EP base plate. The material number is located on the top of
the base plate (15). It is only visible if the pressure regulator is disassembled.
AV03-EP
Fig. 2: Position of the material number on the AV-EP base plate
3. Please see the catalog sheet or the material short key in the configurator for
your AV-EP pressure regulator configuration.
The material short key for the AV-EP pressure regulator is structured as follows:
AV0X-EP-000-YYY-ZZZ-QQQQ
Table 3: Meaning of the material short key
Placeholder See Meaning
Fig. 1
AV0X (13) Series
EP (13) Function
AVENTICS™ AV-EP | R414007537-BAL-001-AB | English
14 13 12
13 12
2 Manufacturer
4 Material number
6 Serial number
8 Output pressure range
10 CE mark
12 Internal plant ID
14 LED designations
AV05-EP
15
Abbreviation
AV03 = AV03 series
AV05 = AV05 series EP = electropneumatic pressure reg-
ulator
Placeholder See
Fig. 1
11
000 (8)
YYY (8)
ZZZ (9, 15)
10
1)
QQQQ (7)
9
11
10
1)
Example : CL1P: C = Classic, L = LED, 1 = pressure in the operating line is main-
tained briefly, P = actual working pressure value
9
5.2 AV-EP pressure regulator versions
5.2.1 AV-EP pressure regulators for fieldbus connection
AV-EP pressure regulators for fieldbus connection use the AES bus coupler to
communicate within the valve system.
AV03-EP
16
18
Fig. 3: AV-EP pressure regulators for fieldbus connection with display (16, 17) and
without display (18, 19)
5.2.2 AV-EP pressure regulators for multipole connection
AV-EP pressure regulators for multipole connection are actuated via a 5-pin, A-
coded M12 connection.
Meaning Abbreviation
Min. output pressure 000 = 0 bar
Max. output pressure 060 = 6 bar
100 = 10 bar
Set point 010 = 0–10 V
420 = 4–20 mA
SER = control via fieldbus
Version C = Classic
S = Smart
Display L = LED
D = display with integrated LEDs
Defined failure response 0 = operating line is exhausted via
to a lack of UA power sup- the AV-EP
ply to the valves
1 = pressure in the operating line is
maintained briefly
Output signal P = actual working pressure value
S = switch output
(only with multipole valve systems)
C = 10 V constant
(only with multipole valve system)
AV05-EP
17
19
24