Idiomas disponibles
Idiomas disponibles
Refer to the following instructions to calibrate the consistency:
1. Disconnect the machine and remove the right side panel. Subsequently remove the
cover of the electrical box.
2. Locate the cable that passes through the current transformer (identified with L1 -
see electrical diagram) and connect the clamp-type ammeter. This way you can
measure the absorption of the beater motor.
3. Fill the cylinder with ice cream mixture in the maximum amounts admitted for each
model.
4. Power the machine.
5. Press the SEMIAUTOMATICO (SEMI-AUTOMATIC) key, set the amperometric
control with SETTING at 240 numbers and confirm the data by pressing
ESTRAZIONE (EXTRACTION) (◄►). The machine starts.
6. With the machine running, simultaneously press and hold the "AGITAZIONE
(MIXING)" and "AUTOMATICO (AUTOMATIC)" keys. This way you enter
"Calibration"
(AUTOMATIC)" and "ESTRAZIONE (EXTRACTION) (◄►)" keys light up and the
display indicates the numerical value of the consistency that gradually increases as
batch freezing proceeds.
7. Pressing the "AGITAZIONE (MIXING) (▲)" and "AUTOMATICO (AUTOMATICO)"
keys you can increase and decrease this number to set.
8. When you reach the desired consistency that corresponds to a certain value in
ampere indicated on the clamp-type ammeter, press "AGITAZIONE (MIXING) (▲)"
and "AUTOMATICO (AUTOMATIC)" until number 240 appears on the display.
9. Press the "ESTRAZIONE (EXTRACTION) (◄►)" key to memorise the setting.
Consistency
Ampere
Watt
Consistency
Ampere
Watt
mode,
the
"AGITAZIONE
CONSISTENCY VALUES @ SET 240 400/50/3
TITAN 3S
6,3
2500
CONSISTENCY VALUES @ SET 240 220/60/3
TITAN 3S
11
2600
(MIXING)
TITAN 2
9,2
3800
TITAN 2
16
4200
(▲)",
"AUTOMATICO
TITAN 1
10,8
4600
TITAN 1
26
5400
ENGLISH - 32
